Location: Polígono Industrial Noáin Esquíroz, Calle J, Nº 2, 31191 Esquíroz, Navarra (España)
DIGITAL COMPRESSION METER FOR ENGINES
The Oxyhtech Digital Compression Tester is an advanced tool that allows verification of compression in the cylinders of internal combustion engines, both gasoline and diesel, with configurations from 2 to 12 cylinders.
Its operation is simple: it connects directly to the vehicle’s battery and, through dedicated software, provides precise results in a matter of seconds.
Where does the measurement of engine compression act?
Compression measurement is essential to evaluate the condition of various engine components:
Cylinders
Detects possible compression losses that may affect engine performance.
Pistons
Identifies misalignments or wear that compromise efficiency.
Valves
Verifies proper sealing for optimal combustion.
EGR (Exhaust gas recirculation)
Evaluates its operation and possible obstructions.
Injectors
Ensures proper fuel atomization.
Spark plugs
Checks their condition for efficient ignition.
Exhaust system
Detects possible leaks that may affect compression.
How does the Digital Compression Tester work?
The Oxyhtech Digital Compression Tester is an advanced device designed to provide accurate diagnostics of the condition of engine cylinders. Its direct connection to the battery allows fast use without the need for additional adapters, while its intuitive software guides the user step by step throughout the entire measurement process.
Results are displayed in real time, providing immediate information on the compression of each cylinder, and in addition, the system allows data to be stored and analyzed, facilitating later comparisons and monitoring engine performance over time.
Get to know our compression meter
Digital Compression tester Oxyhtech
With our OXYHTECH DIGITAL COMPRESSION TESTER it is possible to check the compression in the cylinders of an internal combustion engine, both gasoline and diesel, with between 2 and 12 cylinders, SIMPLY BY CONNECTING IT TO THE BATTERY.
Using dedicated software, it allows you to check the compression efficiency of endothermic engines directly on board the vehicle in a few seconds.
Our DIGITAL COMPRESSION TESTER allows you to:
- Demonstrate to your clients the results of the work carried out (carbon cleaner, oil change, spark plug change, etc.)
- The state of the starter motor
- Battery status at rest and under stress
- Check piston alignment
- Check the compression of each piston
- Possibility of storing and printing the test performed and reviewing it as a whole.
INCREASE YOUR BILLING by offering an initial diagnosis that will allow you to offer extra services to your clients
Benefits of using the Digital Compression Tester
1
Accurate diagnosis
Identifies compression problems that may go unnoticed with traditional methods.
2
Failure prevention
Detects incipient failures in key engine components, allowing preventive interventions.
3
Performance optimization
Ensures that the engine operates at maximum efficiency, improving fuel consumption and emissions.
4
Ease of use
Ergonomic design and intuitive software that make it easy to use even for technicians with no prior experience.
5
Time saving
Reduction of diagnostic time, allowing more customers to be served in less time.
6
Added value for the workshop
Offers an additional service that can differentiate the workshop from the competition.
COMPRESSION MEASUREMENT OF ALL TYPES OF ENGINES
The most profitable solution for compression measurement!
This meter is ideal for a wide range of vehicles and situations:
- Passenger cars: Assessment of the general condition of the engine.
- Commercial fleets: Preventive maintenance to avoid downtime.
- Industrial vehicles: Early detection of problems in high-performance engines.
- Repair workshops: Essential tool for fast and accurate diagnostics.
- Technical inspections: Compliance with regulations and emission standards.
VÁLIDO PARA
Todo tipo de combustibles
Diésel, gasolina, GLP, metano…
Todo tipo de vehículos
Frequently asked questions about the Digital Compression Tester
What engines can be measured with the Digital Compression Tester?
It is compatible with gasoline and diesel internal combustion engines, with between 2 and 12 cylinders.
¿Qué ventajas ofrece una soldadora láser frente a sistemas MIG/TIG?
A laser welder provides clear advantages over traditional welding methods such as MIG or TIG.
It enables perfect metal joints without distortions or visible deformations, ensuring high-quality finishes. Its working speed is significantly higher, producing clean welds without slag or the need for post-weld cleaning processes. Additionally, it offers lower operating costs, as it does not require electrodes or expensive gases, resulting in significant savings for the workshop or industry.
- Metal joints without distortions or deformations.
- Much higher welding speed, without slag or post-weld cleaning processes.
- Lower operating costs, as no electrodes or high-cost gases are required.
How is the device connected to the engine?
It connects directly to the vehicle’s battery, without the need for additional adapters.
How long does it take to measure the compression of all cylinders?
It provides results in real time, allowing all cylinders to be measured in a matter of seconds.
Is maintenance required for the Digital Compression Tester?
The equipment is low maintenance; it is recommended to keep it clean and update the software when necessary.
Is it safe to use on modern engines with advanced electronic systems?
Yes, its direct connection to the battery and dedicated software guarantee safe and accurate use.
